Volkswagen Golf Service & Repair Manual: Checking child seat anchors after an accident

Volkswagen Golf Service & Repair Manual / General body repairs, interior / Technical data / Safety information / Checking child seat anchors after an accident

Points to check

Child seat anchors must be checked for damage and deformation after an accident.

Child seat anchors welded to the body or the seats/backrests or bolted in place may not be repaired or straightened.

Child seat anchors bolted to the body or the seats/backrests must be renewed in the event of damage or deformation.

Child seat anchor securing bolts must be renewed if the bracket is damaged.

Checking seat belt restraint function for holding additional child seats (not for driver seat belt) - country-specific

For the functional check, all surrounding components for the seat belt including the side panel trim must be installed. Activating the restraint func ...

Safety instructions for automatically dimmable interior mirror

WARNING The mirror glass is made of several layers and contains an electrolyte t ...

Other materials:

Removing and installing tyre pressure sensor, Beru tyre pressure monitoring system
View of Beru system WARNING After tyre sealant has been used, the tyre pressure sensor of the respective wheel must be renewed. ...

Tyre sealant
Tyre sealant, use-by date The tyre sealant in the bottle has a limited shelf-life. The bottle therefore has an expiry date -arrow-. Renew tyre sealant when the expi ...

Removing and installing bonnet release lever
Removing – Tighten release lever -1- and unlock bonnet. – Insert a small screwdriver in gap between release lever -1- and retaining clip -2-. – Lever re ...