|
Bringing air conditioning system into service after charging
Draining air conditioner service stationAssembly overview - speed sensor on rear axle, all-wheel drive
1 -
ABS speed sensor
Clean inside surface of hole before inserting sensor
Coat inside surface with high-temperature paste -G 052 112 A3-
Removing and installing
→ Chapter
2 -
Bolt
...
Assembly overview - flanging tool
1 -
Flanging tool upper part
Unbolt to change flanging jaws
2 -
Fastening for handle
Must be unscrewed to access securing bolt for upper part.
3 -
Securing bolt
For fla ...
Setting vehicle to initial position for wheel alignment
If measured values are outside specified tolerances, this
may be because the vehicle is inclined.
Right-hand drive vehicles or e.g. vehicles with an automatic
gearbox may lean to one side slightly.
This is due to the ins ...