
Fig. 24 Indicator lamp in the vehicle key
First read and observe the introductory information
and safety warnings If a button on the vehicle key is pressed briefly, the indicator lamp (arrow) flashes once. The lamp will flash several times if the button is pressed and held, e.g. convenience opening.
If the indicator lamp in the key does not light up when a button is pressed, the battery in the key should be replaced .
Vehicle key
Replacing the batteryRemoving and installing brake caliper, front brakes PC57 and C60
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Brake pedal depressor -V.A.G 1869/2-
& ...
Assembly overview - speed sensor on rear axle, all-wheel drive
1 -
ABS speed sensor
Clean inside surface of hole before inserting sensor
Coat inside surface with high-temperature paste -G 052 112 A3-
Removing and installing
→ Chapter
2 -
Bolt
...
Assembly overview - control unit and hydraulic unit, RHD vehicles
1 -
Brake line
From secondary piston circuit of brake master cylinder to hydraulic
unit.
Identification: 6 mm in diameter and union nut with thread M 12 x 1
Repairing brake lines
→ Chapter
...