Removing and installing ESP sensor unit -G419-
Front brakesAssembly overview - belt pulley, Denso air conditioner compressor
1 -
Bolt
Qty. 3.
4.5 Nm
2 -
Sealing cap
3 -
Nut
25 Nm
–
To unfasten and tighten the hexagon nut, hold the pulley in position
with ...
Brake fluid
Fig. 144 In the engine compartment: cap
on the brake fluid container
First read and observe the introductory information
and safety warnings Brake fluid will gradually absorb water from the surrounding
air. The brake system will be damaged if there is too much water in the brake fluid.
T ...
Balancing wheel, conditions
Before you start balancing the wheels, the following
requirements must be met.
Tyre pressure must be OK.
Tread must not be worn on one side. Tread depth should be at
least 4 mm.
T ...