Volkswagen Golf Owners Manual: Adjusting the driving mode to suit your requirements
First read and observe the introductory information
and safety warnings
The systems that can be adjusted to your individual requirements depend on the vehicle equipment level.
- Switch on the ignition.
- If necessary, switch on the infotainment system.
- Press the Driving Mode Selection button
and touch
the Individual function button in the infotainment system display.
- Touch the Settings function button to open the Individual menu.
If the checkbox in the function button is ticked 
,
the function is switched on.
Touching the 
function button always takes you
back to the previously active menu.
| Menu | Submenu | Settings options |
|---|---|---|
| Individual | DCC: | Comfort |
| Normal | ||
| Sport | ||
| Steering: | Normal | |
| Sport | ||
| Engine: | Normal | |
| Sport | ||
| Eco | ||
| ACC: | Normal | |
| Sport | ||
| Eco | ||
| Bend lighting: | Normal | |
| Sport | ||
| Eco | ||
| Air conditioning: | Normal | |
| Eco | ||
| Reset mode: | Settings are reset to Normal. |
Changes to settings menus are applied immediately, with the exception of engine settings.
WARNING
Function and operation
Fig. 180 In the lower section of the centre
console: Driving Mode Selection button
First read and observe the introductory information
and safety warnings The driver can choose from up to 5 di ...
Other materials:
Assembly overview – high-level brake light, GTI, GTD and
»R«
1 -
Bolt
Specified torque 2 Nm
2 -
Brake light connector
3 -
High-level brake light
With high-level brake light bulb -M25-.
Removing and installing
→ Cha ...
Primary locking element
The primary locking mechanism is what fixes an individual
crimp contact in the contact housing.
If necessary, any housing catches in place (secondary
locking mechanisms) must be released or removed prior to
disengaging the contacts using ...
Bringing air conditioning system into service after charging
Note
If the air conditioner compressor was removed, the V-belt
pulley /freewheel must be turned by hand approx. 10 times prior
to initial operation. This prevents any damage occurring from a
fluid hammer in the air conditioner compressor when th ...
