Function and operation by the user
IntroductionRemoving and installing oil level and oil temperature sender -G266-
Removing
–
Drain off engine oil.
–
Disconnect electrical connector -3-.
–
Undo nuts -1- and remove oil
level and oil temp ...
Removing and installing driver side airbag igniter -N95-
Special tools and workshop equipment
required
Commercially available Torx screwdriver T25 of approx. 100
mm length
Removing
WARNING
&nbs ...
Removing and installing temperature sensor -G18- and overheating sensor
-G189
Removing
–
Dismantling and assembling auxiliary heater
→ Chapter.
–
Remove bolt -1- (4 Nm) and
remove retaining spring -2-.
...