|
Safety measures when working with pyrotechnic componentsRemoving and installing short centre underbody cover
Note
The removal and installation procedures may have to be modified
slightly depending on engine fitted.
Removing
Unclip spreader river -2- and remove
centre underbody panels.
–
Remove bolt -3-.
Installi ...
Removing and installing cigarette lighter illumination bulb -L28-
Note
On some vehicles, the illumination is not provided by a
light bulb, but by an LED (light-emitting diode), depending on
the equipment level. This LED is permanently attached to the
retaining sleeve and cannot be renewed separately.
...
Safety regulations for crash sensors (pressure sensors) for front side
airbags
The side airbag crash sensors respond to changes in pressure
and must therefore be treated with particular caution. Observe
the following:
The correct installation position is vitally important: only
install in the specified ...