Volkswagen Golf Service & Repair Manual: Removing and installing valve

Renewing trim elements, bolted trim elements

These wheels are fitted with exchangeable trim elements. Follow these instructions during installation.     –&n ...

Removing and installing valve, description of the valve

1. Valve body 1 -  Valve body 2 -  Valve core 3 -  Valve cap ...

Other materials:

Removing and installing light conductor for front sill panel moulding ambient lighting -W67-/-W68
  Note The light conductors for front sill panel moulding ambient lighting -W67-/-W68- are integrated into the sill panel mouldings and cannot be renewed individually. If the light conductor for front sill panel mouldi ...

Balancing wheel, checking radial and lateral run-out of wheels and tyres
Before you start balancing the wheels, the following requirements must be met. Tyre pressure must be OK. Tread must not be worn on one side. Tread depth should be at least 4 mm. T ...

Masking areas, front body
Masking areas, plenum chamber A -  No sealant on threads or contact surfaces. C -  No cathodic dip primer, surfacer or top coat on threads or contact surfaces. D -  Threads free of surfacer and top-coat pa ...