Volkswagen Golf Service & Repair Manual: Removing and installing inner door handle

Volkswagen Golf Service & Repair Manual / General body repairs, interior / Trim, noise insulation / Front door trims / Removing and installing inner door handle

The inner door handle is clipped into trim panel.

Note

Removal and installation are described for the trim panel on driver side. Follow same instructions for the front passenger side as appropriate.
Removal and installation are illustrated for 4-door vehicles. Removal and installation on 2-door vehicles are analogous.

Removing

–	Remove front door trim → Chapter.

–	Remove exterior mirror adjuster -EX11- with driver side interior locking button for central locking system -E308- → Electrical system; Rep. gr.96.

–	Remove trim panel → Chapter.

–	Carefully unclip the 9 fasteners out of trim panel around inner door handle.

Installing

Installation is carried out in reverse order.

Removing and installing mirror cover trim

Note Removal and installation are described for the mirror cover trim on driver side. Follow same instructions for the fron ...

Rear door trims

...

Other materials:

Removing and installing Denso belt pulley
Note The pulley is sensitive to impact and should therefore be treated with extreme care. If the belt pulley overload protection has deployed, check freedom of movement of air conditioner compressor before rene ...

Removing and installing mechatronic unit for dual clutch gearbox -J743
Special tools and workshop equipment required Vehicle diagnostic tester Used oil collection and extraction unit -V.A.G 1782- ...

Causes of vibration
Vibration can have a number of different causes. Vibration can also be caused by tyre wear. Tyre wear caused by driving is not always evenly spread across the entire running surface of the tyre. This causes slight imbalances which affect the smooth runni ...