Volkswagen Golf Service & Repair Manual: Removing and installing guide for ISOFIX child seat anchor
| – |
Unclip cover -1- from ISOFIX
child seat anchor -arrow- and
remove it. |
|
|
|
| – |
Push guide -1- downwards out of
recess and detach it from ISOFIX child seat anchor
-2-. |
| – |
Remove guide -arrow- towards
front. |
| Installation is carried out in reverse order. |
| |
→ Chapter „Assembly overview - rear child seat anchors“ |
|
|
|
1 -
ISOFIX child seat anchor
Qty. 4
Welded to underbody
2 -
Guide
For ISOFIX child seat anchor
Qty. 4
Removing and installing ...
Special tools and workshop equipment
required
Wedges -T10383
...
Other materials:
Incorporation of heat exchanger for high-voltage battery into coolant circuit of
high-voltage system
Note
Fill coolant and bleed coolant circuit
→ Rep. gr.19.
The illustration below shows only some of the components of
the coolant circuit for the high-voltage system. For components
which are not sho ...
Removing and fitting head restraints
Fig. 48 Removing the front head restraint
Fig. 49 Removing the rear head restraint
First read and observe the introductory information
and safety warnings Every seat is fitted with a head restraint. The front
head restraints are intended solely for use with the front seats, and the centr ...
Assembly overview - knee airbag
1 -
Knee airbag with driver side knee airbag igniter -N295-.
Removing and installing
→ Chapter
Caution
Any risk of damage to the knee airbag surface due to
mechanical stress must ...
© 2016-2025 Copyright www.vwgolf.org
Assembly overview - rear child seat anchors
Removing and installing cover for Top Tether child seat anchor