|
Removing and installing Valeo heat exchanger, LHD vehicles
Special tools and workshop equipment
required
Drip tray for workshop hoist -VAS 6208-
Hose clamps up to 25 mm -3094-
...
Removing and installing oil level and oil temperature sender -G266-
Removing
–
Drain off engine oil.
–
Disconnect electrical connector -3-.
–
Undo nuts -1- and remove oil
level and oil temp ...
Adapters for setting up purging circuits
The following table contains the various adapters that are
necessary to connect the air conditioner service station to the
refrigerant circuit for purposes of purging and to bridge the
removed reservoir or collector and expansion valve
(vehicle-specific) ...