Volkswagen Golf Service & Repair Manual: Dash panel central tube

Removing and installing side defroster vent

  Note Removal and installation is described for the side defroster vent on driver side. Follow same instructions for the front passenger side as appropr ...

Assembly overview - dash panel central tube

  Note If electrical wires are disconnected or removed and installed, it is useful to make corresponding drawings or photos. This guarantees that everything is re-installed in ...

Other materials:

Uprated shock absorbers and coil springs
Diving or dipping of the rear end between pulling vehicle and trailer can be avoided with the use of uprated shock absorbers and coil springs on the rear axle. These shock absorbers and springs can also be retrofitted in many cases by a Volkswagen worksh ...

Fitting the rear towing eye
Fig. 248 Rear bumper on the right-hand side: removing the cover Fig. 249 Rear bumper on the right-hand side: screwing in the towing eye First read and observe the introductory information and safety warningsThe towing eye is screwed into a threaded hole behind a cover on the right of the ...

Assembly overview - steering column switch module, with mechanical ignition lock
1 -  Ignition key 2 -  Lock cylinder Removing and installing → Chapter 3 -  Immobiliser reader coil -D2- Removing and installing → Chapter 4  ...