
Fig. 154 ParkPilot screen display when towing a trailer (colour)
First read and observe the introductory information
and safety warnings Only the scanned area to the front of the vehicle is shown on the infotainment system screen in vehicles with a factory-fitted towing bracket and a trailer with an electrical connection to the vehicle .
The distance values relating to the sides and rear of the vehicle are not displayed on the infotainment system screen, nor are they indicated by acoustic warning signals.
When towing a trailer, the segments are no longer displayed in relation to the steering input and the vehicle path display is hidden .
Vehicle path display
Rear AssistEngine preheating
Fig. 131 The front left of the bumper:
connection for engine preheating ②
First read and observe the introductory information
and safety warnings In engine preheating mode, the engine coolant is heated
slowly using a heating element while the vehicle is stationary. To do so, the cables
...
Introduction
This chapter contains information on the following subjects:
→ Indicator lamp
→ Information on changing bulbs
→ Changing bulbs in the halogen headlights
→ Changing bulbs in xenon headlights
→ Changing bulbs in the front bumper
→ Changing bulbs ...
Assembly overview - oil filter/oil pressure switch
1 -
Oil filter
Remove and install with oil filter tool -3417-.
Before installing, lightly coat seal with clean engine oil.
20 Nm
See note
→ Anchor
2 -
Oil pre ...