Volkswagen Golf Service & Repair Manual: Slow-drying silicone remover -LLS MAX 008

Volkswagen Golf Service & Repair Manual / General information, paint / Genuine products / SprayMax System / Slow-drying silicone remover -LLS MAX 008

Designation:

Slow-drying silicone remover -LLS MAX 008-

Issued 10.2008

Product description

The slow-drying silicone remover -LLS MAX 008- is a cleaning agent which is rich in active ingredients and whose key features are the simple application and complete evaporation. The raw material basis is a combination of specific solvents.

Properties:

Aerosol formulation made for this specific product for easy application.

Constant atomisation pressure.

Finest aerosol dispersion.

Very high coverage.

First-class painting results.

Easy to apply

Complete evaporation.

Removes silicone, grease, oil, wax, dirt, tar and soot.

Mild, non-aggressive solvent.

Technical data sheet

Application

Recommended for:

Utility for parts painting and spot repairs.

Suitable substrates:

Painted or unpainted metal, plastic or glass surfaces (old or factory paint jobs) which have been coated with a primer or surfacer.

Substrate	Suitability
Surfaces coated with primer or surfacer	+++
Old or factory paint jobs	+++
Plastic parts	+++
Metal/glass	+++

Properties:

Non-aggressive to painted surfaces.

Removes all kinds of silicone and is an ideal cleaner of dirt and soot.

Removes body cavity sealant or wax.

Removes resin-hardened grease residues, such as on door hinges.

Eliminates oil and grease residues.

Ideal for dissolving tar.

Removes adhesive residues, such as from labels.

Application

Note

Protective garments and equipment in accordance with work safety regulations must be worn:

Respirator mask, type A2/P2.

Protective gloves (e.g. latex or nitrile).

Method of application: “spray”.

–	Apply one light spray pass of silicone remover to the surface to be treated, and wipe dry with a clean, dry non-woven cloth.

–	Allow clean surface to dry completely.

–	Heavily soiled parts must be cleaned twice.

–	Replace clothes often - do not use dirty clothes.

Note

After any interruption of the spray operation, hold the aerosol upside down, and press the spray button until the valve is empty.

Caution

Protective garments and equipment in accordance with work safety regulations must be worn.

Observe safety information sheets as well as warnings on the label of the spray can.

After fully emptying the spray can, dispose of as recycling material

Data

Slow-drying silicone remover -LLS MAX 008

Solids content:	0 %
Coverage:	Approx. 0.75 to 1.0 mІ per aerosol.
Degree of gloss:	Not applicable
VOC content:	620 g/l ± 248 g per aerosol.

Storage

The guaranteed shelf life is 36 months from date of production. May be used until the date stated on the label at latest if stored in sealed original containers at +20 °C.

Slow-drying silicone remover -LLS MAX 008

Silicone remover -LLS MAX 007

Designation: Silicone remover -LLS MAX 007- Issued 10.2008 Product description T ...

Blender

Designation: Blender -LLS MAX 009- Issued 10.2008 Product description The blende ...

Other materials:

Operating ParkPilot
Fig. 148 ParkPilot ultrasound sensors around the vehicle, A: in the front bumper, B: in the rear bumper Fig. 149 In the lower section of the centre console: button for switching the ParkPilot on and off First read and observe the introductory information and safety warnings The ParkPilot ...

Dismantling and assembling drive shaft, constant velocity joint VL100
Special tools and workshop equipment required Thrust plate -VW 401- Thrust plate -VW 402- Press tool -VW 408 A- Press tool -VW 411- Tube -VW 416 B- Thrust washer -VW 447 H- &nbs ...

Introduction
This chapter contains information on the following subjects: → Handling seat covers → Cleaning cloth seat covers, fabric trim and Alcantara upholstery → Cleaning and caring for natural leather covers → Cleaning leatherette upholstery → C ...