Volkswagen Golf Service & Repair Manual: Checking a battery with colour indicator

Volkswagen Golf Service & Repair Manual / Electrical system, general information / Starter- current supply- CC / Checking battery / Checking a battery with colour indicator

WARNING

Danger of injury! Observe warning notices and safety regulations → Chapter!

Carry out procedure in sequence as follows:

1.	Visual check → Chapter

2.	Check the colour indicator, “3-colour”, → Chapter or “2-colour”, → Chapter

WARNING

It is not permissible to test or charge batteries whose colour indicator is light yellow. Do not slave/jump start the vehicle!

Danger of explosion when checking and charging or slave/jump starting.

These batteries must be renewed.

3.	Battery test with battery tester with printer -VAS 6161- → Chapter.

4.	Depending on the result of the battery test, “perform current draw test” → Chapter.

Absorbent glass mat battery

Carry out procedure in sequence as follows:

1.	Visual check → Chapter

2.	Battery load test with battery tester with printer -VAS 6161- → Chapter

3.	Depending on the result of the battery test, “perform current draw test” → Chapter.

Checking battery

WARNING Danger of injury! Observe warning notices and safety regulations → Chapter! ...

Visual check

WARNING Danger of injury! Observe warning notices and safety regulations → Chapter! ...

Other materials:

Changing headlights over from driving on right to driving on left, LED headlights
If a right-hand drive vehicle is driven in a left-hand drive country, or vice versa, the headlights must be converted. This is necessary in order to avoid dazzling oncoming traffic with the asymmetric low beam headlights. Note ...

Changing bulbs in the tail light cluster in the body
Fig. 239 On the side of the luggage compartment: removing the tail light cluster Fig. 240 Tail light cluster in the body: removing the bulb holder ① to ⑤: release tabs First read and observe the introductory information and safety warningsThe steps should only be carried out in the spe ...

Removing and installing retaining plate for manually operated or automatic anti-dazzle interior mirror, without rain and light sensor -G397- and front camera for driver assist systems -R242
Materials Glass-metal adhesive kit “D 000 703 A1” Special tools and workshop equipment required Glass scraper (commercially available) -1- ...