Volkswagen Golf Service & Repair Manual: Supplementary heating mode

Volkswagen Golf Service & Repair Manual / Auxiliary heater / Aux. heater/heater booster / Regulation of auxiliary and supplementary heater / Supplementary heating mode

Once the coolant temperature has reached approx. 84 °C, the control unit switches to energy-saving control mode. If the coolant temperature continues to rise above approx. 88 °C, the control unit switches to the controlled waiting period. If the coolant temperature does not drop below approx. 76 °C within 15 minutes during the controlled waiting period, the heater unit will initiate the start procedure into the standard control mode when the coolant temperature does drop below approx. 76 °C.

Functional description

The auxiliary and supplementary heater can be started by means of the remote control, the instant heating button or appropriate programming in the central monitor. Th ...

Auxiliary heater mode

Switching on auxiliary heater mode in vehicles with manual air conditioning: – Press instant heating button-1-. ...

Other materials:

Introduction
This chapter contains information on the following subjects: → Displays → Description ProActive occupant protection is an assistance system that initiates action to protect vehicle occupants in dangerous situations. However, the system cannot prevent a collision. Add ...

Removing and installing rear belt guide
Removing – Remove luggage compartment side trim, estate → Chapter. – Unscrew the 2 bolts -1-, and remove belt guide -2-. ...

Operating and display unit
Overview of control and display unit 1 - Heated driver seat regulator Optional Seat heater has 3 heat settings. Current setting is shown by LED. If no LED is lit, seat heating is switched off. 2 - ...