
Fig. 214 Removing the cover of the gearshift gate

Fig. 215 Unlocking the selector lever lock manually (Variant A) and (Variant B)
First read and observe the introductory information
and safety warningsIf the power fails in the vehicle (for example if the battery is discharged) and the vehicle has to be pushed or towed, the manual release mechanism must be used to put the selector lever in the N position.
The manual release mechanism is located under the cover of the gearshift gate on the right-hand side, as seen from the direction of travel.
Preparation
Removing the cover of the gearshift gate
Unlocking the selector lever lock manually Variant A
Unlocking the selector lever lock manually Variant B

WARNING

NOTICEThe automatic gearbox will become damaged if the vehicle is allowed to roll for a long period of time or at a high speed (for example while being towed) with the selector lever in position N and the engine switched off.
Unlocking the tailgate manually
Vehicle toolkitBuffing cloth, white -VAS 6176
Designation:
Buffing cloth, white -VAS 6176-
Product description:
Extremely soft cloth for delicate, demanding polishing. A
combination of viscose and polyester fibres make the cloth
particul ...
Tyre damage due to insufficient tyre pressure
The most common causes for tyre failure are minor external
damage, a defective valve or a leaking rim due to corrosion or
damage.
Separation of carcass and rubber
Excessive heating ...
Stowage compartment in the front centre armrest
Fig. 112 Stowage compartment in the front
centre armrest
First read and observe the introductory information
and safety warnings To open, pull the centre armrest all the way up
in the direction of the arrow .
To close, guide the armrest down.
WARNING
The centre armrest can obstruct ...