VW Golf manuals

Volkswagen Golf Service & Repair Manual: 12 V socket

Removing and installing 12 V socket

  Caution
If excessive force is exerted on sockets without illumination, the retaining sleeve may be damaged.
Only illuminated sockets (cigarette lighter) can be removed with the puller T 40148.
The puller does not manage to release the locking lugs of sockets without illuminated retaining sleeve.
Usually sockets without illumination cannot be removed without being damaged.
Refer to removing and installing cigarette lighter -U1- → Chapter.
   
Removing and installing socket illumination bulb -L42-
The removal of the socket illumination bulb -L42- is performed in the same way as the removal of the cigarette lighter illumination bulb -L28- → Chapter.
   
Lights, lamps, switches inside, anti- theft system
...

Cigarette lighter -U1-
The following descriptions apply to the rear left cigarette lighter -U3-, rear right cigarette lighter -U7-, rear cigarette lighter -U9-, 12 V socket 2 -U18-, 12 V so ...

Other materials:

Assembly overview - subframe
1 -  Anti-roll bar with rubber bush Removing and installing → Chapter 2 -  Nut When tightening, counterhold on multipoint socket of joint stub. Renew after removing ...

Removing and installing rain and light sensor, vehicles with front camera for driver assist systems
  Note The rain and light sensor has a silicon layer (coupling pad) which forms the contact surface to the windscreen. The rain and light sensor has been designed so that it can be used again. A prerequisite for re-use ...

Removing and installing A-pillar trim
Special tools and workshop equipment required         Removal wedge -3409     Torque wrench -V.A.G 1783 Removing ...

© 2016-2024 Copyright www.vwgolf.org