Volkswagen Golf Owners Manual: Changing bulbs
- Introduction
- Indicator lamp
- Information on changing bulbs
- Checklist
- Changing bulbs in the halogen headlights
- Changing bulbs in xenon headlights
- Changing bulbs in the front bumper
- Changing bulbs in the tail light cluster in the tailgate
- Changing bulbs in the tail light cluster in the body
- Changing the bulb in the number plate light
Changing a blown fuse
Fig. 232 Blown fuse: A: flat blade fuse,
B: JCASE® fuse
Fig. 233 Remove or insert fuse with plastic
pliers: A. flat blade fuse, B. JCASE® fuse
First read and observe the introductory informa ...
Introduction
This chapter contains information on the following subjects:
→ Indicator lamp
→ Information on changing bulbs
→ Changing bulbs in the halogen headlights
→ Changin ...
Other materials:
Overview of fitting locations - front control motors, RHD vehicles
1 -
Air recirculation flap control motor -V113-
Checking: with vehicle diagnostic tester
Removing and installing
→ Chapter
Renewing: initiate basic setting using vehicle diagnostic tester.
2&nbs ...
Blowing through refrigerant circuit with compressed air and nitrogen
Use compressed air to force moisture and other contaminants
out of the refrigerant circuit and use nitrogen to force
moisture out of the refrigerant circuit.
The method of blowing through the refrigerant circuit with
compressed air ...
Minimum curing periods for bonded windows
WARNING
There are special requirements for renewing bonded
windows. One of these standards is, for example, that a
freshly bonded windscreen must comply with the safety
requirements, even in an accident, fo ...