VW Golf manuals

Volkswagen Golf Owners Manual: Information on changing bulbs

First read and observe the introductory information and safety warnings

Indicator lamp
First read and observe the introductory information and safety warnings Lit up Possible cause Solution There is a defective bulb in th ...

Checklist
Always carry out the following actions for changing a bulb in the given order : Park the vehicle on a firm and level surface at a safe distance from the flow of traffic. Switch on the ...

Other materials:

After changing a wheel
First read and observe the introductory information and safety warnings Clean the tools as necessary and place them back in the foam rubber holder in the luggage compartment. Stow the spare wheel, temporary spare wheel or the removed wheel safely in the luggage compartment. Th ...

Repairs to CAN bus wiring
  An unshielded two-wire line -1- and -2- with a cross section of 0.35 mm2 or 0.5 mm2 is used for CAN bus wiring. The colour codes of the CAN bus wiring can be gleaned from the following table:   ...

Checking pistons and cylinder bores
Checking piston –  Using a micrometre, measure approx. 10 mm from the lower edge, perpendicular to the piston pin axis. Maximum deviation from nominal dimension: 0.04 mm   ...

© 2016-2019 Copyright www.vwgolf.org