Volkswagen Golf Service & Repair Manual: Removing tyre from wheel

Volkswagen Golf Service & Repair Manual / Running gear, axles, steering / Wheels, tyres, axle align / Wheels, tyres / Removing tyre from wheel

Tyres which have been filled or sealed using tyre sealant must be drained before removal.

Caution

Avoid eye and skin contact with tyre sealant.

It is a health hazard and may cause eye irritation and allergies.

During this work, wear protective gloves and safety goggles.

–	Place the wheel on an even surface.

–	Unscrew and remove the valve insert of tyre valve.

–	Use a suitable drill or mill to carefully drill a hole in shoulder area of tyre.

–	Hold wheel over a suitable container and drain sealant.

–	Pull tyre from rim.

–	Clean wheel rim with, for example, a moist cloth.

Removing tyre from wheel

Mounting tyre

Ensure that the wheel rim is clean. – Insert new tyre valve with -VAS 6459--1-. ...

Other materials:

Balancing wheel, balancing wheel on stationary wheel balancer
Before you start balancing the wheels, the following requirements must be met. Tyre pressure must be OK. Tread must not be worn on one side. Tread depth should be at least 4 mm. T ...

Removing and installing headlight main beam bulb -M30-/-M32- (LED)
Special tools and workshop equipment required Front-end hook -3370- Torque wrench -V.A.G 1783- ...

Waxing and polishing the vehicle
First read and observe the introductory information and safety warnings Waxing Waxing protects the paintwork. You will need to re-wax the vehicle with a good hard wax if water no longer clearly forms small drops and runs off the paintwork when it is clean. Even if a wax solution is used re ...