VW Golf manuals

Volkswagen Golf Service & Repair Manual: Sanding

Avoid sanding through to substrate
–  It is recommended to carefully sand the marked area by hand to avoid “sanding through” the cathodic dip primer.
 

Sanding

Seam seals

Sealing
–  Apply sealant.
 

Seam seals

Fine seam seals

    Explanation of symbols
    ...

    Paintwork structure
    ...

    Other materials:

    Removing and installing electronically controlled damping control unit -J250-, saloon
    Special tools and workshop equipment required Vehicle diagnostic tester Removing Location: electronically controlled damping control unit -J250- is installed behind left luggage compartment s ...

    Removing and installing door inner seal
    During production, a sealant is applied to the door inner seals, which are then placed on the door flange and rolled on.   Note When removing the seal, the sealant is distributed across the inside of the seal. The sides are bent upwards ...

    Frontal collisions and the laws of physics
    Fig. 59 Unbelted occupants in a vehicle heading for a brick wall Fig. 60 Unbelted occupants in a vehicle striking a brick wall First read and observe the introductory information and safety warnings The physical principles involved in a frontal collision are relatively simple. As soon ...

    © 2016-2019 Copyright www.vwgolf.org