Flat spots (from locking wheels)
Flat spots can result from an extreme brake application
which causes the wheels to lock, so that the rubber is worn off
at the contact patch between the tread and the road surface.
As the tyres slide over the road surface, friction generates
...
Adjusting wiper arms
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Note
If it is necessary for the wiper motor to run during the
working procedure, ...
Run-flat tyres, structure and identification of a SST tyre
Removing and fitting run-flat tyres
→ Chapter.
If run-flat tyres are used, a Tyre Pressure Monitor display
must be fitted.
Damage to the tyre and the resulting pressure loss cannot be
detected with the n ...