Volkswagen Golf Service & Repair Manual: Removing and installing intermittent wiper switch -E22-

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Steering column switch module / Removing and installing intermittent wiper switch -E22-

Note

The turn signal switch -E2-, cruise control system switch -E45- and intermittent wiper switch -E22- are combined to form the steering column combination switch -E595-.

These switches cannot be separated.

If one of the switches is defective, the steering column combination switch -E595- must be renewed as a complete unit.

–	Removing and installing intermittent wiper switch -E22- → Chapter.

Removing and installing immobiliser reader coil -D2-, vehicles with ignition key

Note

The immobiliser reader coil -D2- is integrated in the lock cylinder and cannot be renewed individually.

–	Removing and installing lock cylinder → Chapter.

Removing and installing cruise control system switch -E45

Note t The turn signal switch -E2-, cruise control system switch -E45- and intermittent wiper switch -E22- are combine ...

Removing and installing immobiliser reader coil -D2-, vehicles with keyless access locking and starting system

Removing – Move steering wheel to rearmost and lowest position. Use the entire range of adjustment of the steering column for this ...

Other materials:

Removing and installing tyre pressure sensor, Beru tyre pressure monitoring system
View of Beru system WARNING After tyre sealant has been used, the tyre pressure sensor of the respective wheel must be renewed. ...

Purging (cleaning) refrigerant circuit with refrigerant R134a
Vehicles with high-voltage system (hybrid vehicles) Observe the additional warning instructions for working on vehicles with high-voltage system → Electrical system; Rep. gr.93. ...

Removing and installing window regulator motor -V26-/-V27
Special tools and workshop equipment required Note Removal and installation are only described for the left window regulator motor. ...