Volkswagen Golf Service & Repair Manual: Without roller dynamometer for four-wheel drive vehicles
 Note
| If no test rig is available for four-wheel drive vehicles,
the brake test can also be carried out on a standard single-axle
roller dynamometer as follows: |
| – |
Drive vehicle forwards onto the rollers. |
| – |
Switch engine off and wait for 2 seconds. |
| – |
Carry out front brake test. |
| – |
Start engine and wait for approx. 5 seconds until sufficient
vacuum has been built up. |
| – |
Drive vehicle forwards until rear wheels are positioned on
rollers. |
| – |
Switch engine off and wait for 2 seconds. |
| – |
Carry out rear brake test. |
| – |
Start engine and wait for approx. 5 seconds until sufficient
vacuum has been built up. |
|
Note
The brake test must be performed on a controlled
contra-rotating single-axle roller dynamometer for four-wheel
drive vehicles.
...
Activate »TЬV mode«:
Seat belt is fitted
Rear axle on single-axle roller dynamometer
Ign ...
© 2016-2024 Copyright www.vwgolf.org
On a regulated roller dynamometer with contra-rotating rollers for
four-wheel drive vehicles
Checking electromechanical parking brake, vehicles with front-wheel drive