First read and observe the introductory information and safety warnings
Display | Possible cause | Solution |
---|---|---|
Any or all vehicle doors are open or not closed properly. | Do not drive
on! Open the appropriate vehicle door and then close it again. |
Several warning and indicator lamps will light up briefly as a functional check when the ignition is switched on. They will switch off after a few seconds.
A symbol in the instrument cluster display indicates that a vehicle door is open or not closed properly. This symbol is also visible when the ignition is switched off . The display will go out approximately 15 seconds after all doors have been closed and the vehicle has been locked.
The symbol can differ depending on the version of the instrument cluster.
Removing and installing window regulator
Special tools and workshop equipment
required
Note
Removal and installation are described only for the left
window regulator. Removal and installa ...
Assembly overview - rear window
1 -
Rear window
Removing and installing
→ Chapter
2 -
PUR adhesive sealant
Cross section of bead: -width b- = 7 mm,
-height a- = 10 mm (including precoating,
residual material on window glass and w ...
Assembly overview - wheel, PAX
1 -
Wheel
Fitting wheels
→ Chapter
2 -
Wheel bolts
Different versions
→ Chapter
3 -
PAX tyre
Identification markings on the tyre sidewall ...