Volkswagen Golf Service & Repair Manual: Vehicles with torsion beam axle
The connecting pipe can be cut through at the cutting point
in order to renew the centre and rear silencers separately. |
Cutting point is marked by an indentation on circumference
of exhaust pipe. |
Special tools and workshop equipment
required |
|
|
|
Chain-type pipe cutter -VAS 6254- |
|
|
|
– |
Cut through exhaust pipe at right angles at cutting point
-arrows- using chain pipe cutter
-VAS 6254-. |
|
|
|
– |
Position clamp centrally at side marks
-arrows- when installing. |
– |
Aligning exhaust system free of tension
→ Chapter. |
|
|
|
Removing
–
If fitted, remove rear left underbody trim
→ General body repairs, exterior; Rep. gr.66.
...
The connecting pipe can be cut through at the cutting point
in order to renew the centre and rear silencers separately.
Cutting point is marked ...
Other materials:
Assembly overview - auxiliary heater attachments
1 -
Auxiliary heater
2 -
Clamping piece
3 -
Coolant hose
4 -
Air intake silencer
Removing and installing
→ Chapter
5 -
Bracket for ci ...
Driving with an automatic gearbox
First read and observe the introductory information
and safety warnings The gearbox changes the forward gears up and down automatically.
Driving down hills
The steeper the gradient, the lower the gear you will need. Lower gears increase
the braking effect of the engine. Never allow the vehic ...
Connecting and disconnecting airbag adapter
Special tools and workshop equipment
required
Airbag adapter -VAS 6282-
–
Connect airbag adapter -VAS 6282- to side airbag wiring harness
-1-.
...
© 2016-2024 Copyright www.vwgolf.org