1 - | Rubber mounting |
Renew if damaged |
2 - | Bolt |
20 Nm |
3 - | Mounting |
Renew if damaged |
4 - | Rear silencer |
In initial equipment, component with centre silencer. Can be renewed individually for repair purposes. |
Removing and installing → Chapter |
Separating exhaust pipes/silencers → Chapter |
Aligning exhaust system free of tension → Chapter |
5 - | Rear clamp |
Align exhaust system free of tension before tightening → Chapter. |
Installation position → Fig. |
Tighten threaded connections evenly. |
6 - | Nut |
30 Nm |
7 - | Rubber mounting |
Renew if damaged |
8 - | Bolt |
20 Nm |
9 - | Mounting |
Renew if damaged |
10 - | Centre silencer |
Combined in one unit with rear silencer as original equipment. Can be renewed individually for repair purposes. |
Removing and installing → Chapter |
Separating exhaust pipes/silencers → Chapter |
Aligning exhaust system free of tension → Chapter |
Removing and installing subframe with steering rack, LHD vehicles, except
for e-Golf
Special tools and workshop equipment
required
Ball joint puller -T10187-
Torque wrench -V.A.G 1332-
Remov ...
Assembly overview - dual halogen headlight
1 -
Bulb for side lights/daytime running lights/main beam headlights
The bulb has 3 functions:
Left side light bulb -M1-/right side light bulb -M3-
Left daytime running light bulb -L174-/right daytime running light
bul ...
Checking shock absorbers when removed
Defective shock absorbers can be identified by loud rumbling
noises when driving, caused by wheel hopping, especially on bad
roads. Heavy fluid leakage is an additional visual indication.
Note
Shock absorbers are maintenance-fre ...