Fig. 77 On the rear seats: figures Ⓐ and Ⓑ illustrate the main securing points for the child restraint system on the lower retaining rings and top tether. Figure Ⓒ shows how to secure the child restraint system using the vehicle seat belt
First read and observe the introductory information and safety warningsAlways secure child seats properly, safely and in accordance with the instructions from the child seat manufacturer.
The fitted child seat must sit close to the vehicle seat and must not be able to move or tip more than 2.5 cm.
Child seats that are intended to be secured using the top tether must be secured in the vehicle using the top tether . Attach the top tether only to the retaining rings fitted for this purpose. Always pull the top tether tightly so that the child seat is secure and fits closely to the seat.
Country-specific securing systems
Variants of the attachment system :
The systems consist of attachments for child restraint systems with a top tether and lower anchoring points in the seat.
Stowage compartment in the front centre console
Fig. 111 In the centre console: stowage
compartment
First read and observe the introductory information
and safety warnings To open, briefly press the cover of the stowage
compartment (arrow).
To close, push the stowage compartment cover down as far as it will go.
The stowage co ...
Removing and installing A-pillar gap cover
Note
Removal and installation are described for the left
vehicle side. Follow same instructions for the right side as
appropriate.
Special tools and workshop equipment
required
...
Overview of fitting locations - seat belts and anchorage points, estate
1 -
Front belt buckles
Assembly overview
→ Chapter
Removing and installing
→ Chapter
2 -
Front belt end anchor
Assembly overview
→ Chapter
Removing and installing
→ Chapte ...