Note
|
Temperature in °C | Pressure in bar (positive pressure) R134a |
-45 | -0.61 |
-40 | -0.49 |
-35 | -0.34 |
-30 | -0.16 |
-25 | 0.06 |
-20 | 0.32 |
-15 | 0.63 |
-10 | 1.00 |
-5 | 1.43 |
0 | 1.92 |
5 | 2.49 |
10 | 3.13 |
15 | 3.90 |
20 | 4.70 |
25 | 5.63 |
30 | 6.70 |
35 | 7.83 |
40 | 9.10 |
45 | 10.54 |
50 | 12.11 |
55 | 13.83 |
60 | 15.72 |
65 | 17.79 |
70 | 20.05 |
75 | 22.52 |
80 | 25.21 |
85 | 28.14 |
90 | 31.34 |
Overview of fitting locations - front control motors, air conditioning system
with electric/manual controls, RHD vehicles
1 -
Temperature flap control motor -V68-
Checking: with vehicle diagnostic tester
Removing and installing
→ Chapter.
Renewing: initiate basic setting using vehicle diagnostic tester.
2 -&nb ...
Introduction
This chapter contains information on the following subjects:
→ Warning lamp and coolant temperature display
→ Coolant specification
→ Checking the coolant level and refilling coolant
Never carry out any work on the engine coolant system if you are not famili ...
General notes
Cleanliness specifications for working on
the auxiliary heater and fuel system
When working on the fuel supply and injection system, pay
careful attention to the following “rules”:
Thoroughly clean all unions a ...