First read and observe the introductory information and safety warnings
When fitting a child seat to a rear seat, the position of the front seat must be adjusted to ensure that the child has sufficient space. Adjust the front seat according to the size of the child seat and child. Ensure that the front passenger can still maintain a correct sitting position .
Suitable child seats
The child seat must have been approved by the manufacturer for use on the rear bench seat with side airbag.
Universal child seats in groups 0, 0+, 1, 2, or 3 as specified in ECE-R 44 can be fitted to the rear seats.
The outer seats are suitable for child seats with the ISOFIX system which are specially approved for this vehicle type by ECE-R 44.
ISOFIX child seats approved for use on rear seats
There are different categories of ISOFIX child seats: universal, semi-universal and vehicle-specific.
WARNING
Any child in a child seat on the rear bench seat may sustain fatal injuries if they play with lockable seat belts that are not in use.Removing and installing inlet camshaft oil seal, pulley end, engine codes
CPTA, CHPA, CZEA, CZDA
Special tools and workshop equipment
required
Assembly tool -T10478 B-
Removing
–
Detach toothed belt from camshafts
→ Chapter ...
Changing headlights over from driving on right to driving on left (gas
discharge headlights for cornering light and LED daytime running light)
If a right-hand drive vehicle is driven in a left-hand drive
country, or vice versa, the headlights must be converted. This
is necessary in order to avoid dazzling oncoming traffic with
the asymmetric low beam headlights.
Note
...
Removing engine
Special tools and workshop equipment required
Removal lever -80 - 200-
Extension -2024 A /1- of lifting tackle -2024 A-
Engine and gearbox jack -V.A.G 1383 A- or -VAS 6931-
Engine bracket -T10497-
Drip ...