Volkswagen Golf Service & Repair Manual: Undercoating, additional protected areas on CNG-powered vehicles
Note
Undercoating (stone-chipping protection) applied during repair work
must be identical in appearance and thickness to the original
undercoating. |
Water drainage holes must remain clear. |
All threaded studs and welded nuts with metric threads as well as
all other studs and contact surfaces for assembly must be functional
following the application of the undercoating. |
Undercoating, rear, additional for CNG (gas-powered vehicle) |
Note
Undercoating (stone-chipping protection) applied during repair work
must be identical in appearance and thickness to the original
undercoating.
Wate ...
Undercoating, rear body of hybrid vehicles
a -
Undercoating
Coat thickness: 0.3 mm
b -
Undercoating
...
Other materials:
Wheel cover
Fig. 220 Removing the wheel covers
First read and observe the introductory information
and safety warningsRemoving the wheel covers
Take the box spanner and wire hook from the vehicle toolkit.
Insert the wire hook into one of the holes in the wheel cover.
Push the box spanner thr ...
Assembly overview - brake servo/brake master cylinder, LHD vehicles
Note
Only use new brake fluid conforming to VW standard (VW 501 14).
1 -
Self-locking hexagon nut
Always renew after removing
Bolting sequence
U ...
Information on wheel rims
Structure of wheel rim
1 -
Wheel rim flange
Stop for tyre side beading
2 -
Hump (H2) on both shoulders of rim
Prevents the tyre slipping off the shoulder of the rim while driving
through tight b ...
© 2016-2024 Copyright www.vwgolf.org