Undercoating (stone-chipping protection) applied during repair work must be identical in appearance and thickness to the original undercoating. |
Water drainage holes must remain clear. |
All threaded studs and welded nuts with metric threads as well as all other studs and contact surfaces for assembly must be functional following the application of the undercoating. |
Undercoating overview |
a - | Undercoating |
Coat thickness: 0.3 mm |
b - | Undercoating |
Coat thickness: 0.5 mm |
c - | Undercoating |
Coat thickness: 1.2 mm |
Removing and installing headlight range control unit -J431-/control unit for
cornering light and headlight range control -J745-, RHD vehicles
Note
When renewing the control unit, select
Renew function for the respective control unit in
Guided fault finding or
Guided functions mode
→ Vehicle
diagnostic tester.
Removing
â ...
Windscreen wiper functions
First read and observe the introductory information
and safety warnings 
Windscreen wiper response in various situations:
When the vehicle
is stationary.
When switched
on, the wipers will temporarily be switched to the next setting down.
...
Removing and installing condensation drainage (LHD)
Removing
–
Remove right centre console trim in footwell
→ General body repairs, interior; Rep. gr.68.
Risk of damage to airbag control unit. Connectors may corrode if
moisture enters.After disconnecting, ...