Volkswagen Golf Service & Repair Manual: Undercoated areas

Volkswagen Golf Service & Repair Manual / Vechile- specific paint information / Undercoating / Undercoated areas

Note

Undercoating (stone-chipping protection) applied during repair work must be identical in appearance and thickness to the original undercoating.

Water drainage holes must remain clear.

All threaded studs and welded nuts with metric threads as well as all other studs and contact surfaces for assembly must be functional following the application of the undercoating.

Undercoating, detail view, front body

Undercoated areas

a -	Undercoating

Coat thickness: 0.3 mm

Note

Undercoating (stone-chipping protection) applied during repair work must be identical in appearance and thickness to the original undercoating.

Water drainage holes must remain clear.

All threaded studs and welded nuts with metric threads as well as all other studs and contact surfaces for assembly must be functional following the application of the undercoating.

Undercoating, detail view, rear body

Undercoated areas

a -	Undercoating

Coat thickness: 0.3 mm

b -	Undercoating

Coat thickness: 0.5 mm

Note

Undercoating (stone-chipping protection) applied during repair work must be identical in appearance and thickness to the original undercoating.

Water drainage holes must remain clear.

All threaded studs and welded nuts with metric threads as well as all other studs and contact surfaces for assembly must be functional following the application of the undercoating.

Undercoating, side member, with sectional view

Undercoated areas

1 -	Inner part of side member

2 -	Floor section

3 -	Side panel, exterior

b -	Undercoating

Coat thickness: 0.5 mm

Height -x- = 35 mm corresponds to thickness of 0,5 mm.

Height -y- = 10 mm decreasing thickness down to approx. 0.3 mm.

c -	Undercoating

Coat thickness: 1.2 mm

Note

Undercoating (stone-chipping protection) applied during repair work must be identical in appearance and thickness to the original undercoating.

Water drainage holes must remain clear.

All threaded studs and welded nuts with metric threads as well as all other studs and contact surfaces for assembly must be functional following the application of the undercoating.

Undercoating, rear body, front-wheel drive

Undercoated areas

1 -	Longitudinal member/rear wheel housing, vehicles with torsion beam rear suspension

2 -	Longitudinal member/rear wheel housing, vehicles with multi-link suspension

a -	Undercoating

Coat thickness: 0.3 mm

b -	Undercoating

Coat thickness: 0.5 mm

Note

Undercoating (stone-chipping protection) applied during repair work must be identical in appearance and thickness to the original undercoating.

Water drainage holes must remain clear.

All threaded studs and welded nuts with metric threads as well as all other studs and contact surfaces for assembly must be functional following the application of the undercoating.

Undercoating, rear underbody, 4-Motion vehicles

In the magnifying glass view the left longitudinal member/rear wheel housing is shown. The right side is the mirror image.

Undercoated areas

a -	Undercoating

Coat thickness: 0.3 mm

b -	Undercoating

Coat thickness: 0.5 mm

Undercoated areas, body overview indicating differing coat thicknesses

Note Undercoating (stone-chipping protection) applied during repair work must be identical in appearance and thickness to the original undercoating. Wate ...

Undercoating, additional protected areas on CNG-powered vehicles

Note Undercoating (stone-chipping protection) applied during repair work must be identical in appearance and thickness to the original undercoating. Wate ...

Other materials:

Pre-treatment of bonded surfaces when renewing laser-welded roofs
Using P180-grade sandpaper, dry-sand cathodic dip primer on bonding surface for roof → Item down to bare metal. – Using P180-grade sandpaper, dry-sand bonding surface for ...

Charging battery in maintenance mode with solar panel -VAS 6102A-
Solar panel VAS 6102A General description: Solar panel -VAS 6102A- supports onboard supply and prevents spontaneous battery discharging. Solar panel -VAS 6102A- achieves max. voltage of 14.3 V and ...

Removing and installing engine oil cooler
Removing – Drain coolant → Chapter. – Remove intake manifold → Chapter. – Unscrew bolts -arro ...