Removing and installing oil level and oil temperature sender -G266-
Removing
–
Drain off engine oil.
–
Disconnect electrical connector -3-.
–
Undo nuts -1- and remove oil
level and oil temp ...
Removing and installing alarm horn -H12-
Removing
–
Remove plenum chamber cover
→ General body repairs, exterior; Rep. gr.50.
–
Remove nuts -3-.
–
...
Assembly overview - toothed belt, engine codes CPTA, CHPA, CZEA, CZDA
1 -
Toothed belt
Before removing, mark direction of rotation with chalk or
felt-tipped marker pen.
Check for wear
Removing
→ Chapter
Installing (adjusting valve timing), CPTA, CZEA
& ...