Balancing wheel, conditions
Before you start balancing the wheels, the following
requirements must be met.
Tyre pressure must be OK.
Tread must not be worn on one side. Tread depth should be at
least 4 mm.
T ...
Overview of fitting locations - components not located in passenger
compartment, Golf Variant LHD
1 -
Exhaust ventilation for passenger compartment
Checking
→ Chapter
Removing and installing
→ Chapter
2 -
Humidity sender for air conditioning system -G260-
Check v ...
Removing and installing front body acceleration senders -G341-/-G342-
Special tools and workshop equipment
required
Torque wrench -V.A.G 1410-
Removing
–
Pull seal off entire length of plenum chamber cover.
...