Volkswagen Golf Service & Repair Manual: Testing for leaks
Special tools and workshop equipment
required |
Tester for brake pressure regulator -V.A.G 1310 A- |
|
|
|
Adapter M10 -V.A.G 1310/6- |
Brake system (hydraulic unit, brake hoses, brake lines and
brake calipers) operating properly and free of leaks. |
Carry out the following work: |
– |
Remove bleeder valve at one of front brake calipers. |
– |
Connect pressure gauge -V.A.G 1310 A- and bleed. |
– |
Apply pressure to brake pedal until gauge indicates a
pressure of 50 bar. The pressure must not drop by more than
4 bar within the test period of 45 seconds. Renew brake master
cylinder if drop in pressure exceeds specification. |
|
|
|
Note
Carry out subsequent bleeding when:
brake pedal travel is too long or so-called
»soft brake pedal«
...
Other materials:
Renewing bonded rubber bush for wheel bearing housing, four-wheel drive
Special tools and workshop equipment required
Assembly tool -3301-
Viscous fan fitting tool -3367-
Carrier -3390-
Torque wrench -V.A.G 1332-
Removing
– ...
Aqua Premium system
Designation:
Uni (solid-colour) waterborne mixing paint -LWM 083 ...-
Metallic, pearlescent, special-effect waterborne mixing
paint -LWM 084/ 086...-
Uni (solid-colour) waterborne base ...
Removing and installing TV tuner, eGolf
Special tools and workshop equipment
required
Protective cap for wiring harness connector -VAS 6223/9-
If the control unit is replaced, select the
Replace function of the resp ...
© 2016-2024 Copyright www.vwgolf.org