Fig. 142 In the centre console: button for switching the traction control system (TCS) or electronic stability control (ESC) on and off manually
Fig. 143 In the centre console: button for switching the traction control system (TCS) on and off manually (vehicles without ESC)
The electronic stability control (ESC) only functions when the engine is running. It consists of ABS, EDL and TCS.
The TCS or ESC should only be switched off in certain situations when the traction achieved is not sufficient. For example:
The TCS or ESC function should be switched back on again afterwards.
Switching the TCS function on and off
Switching the TCS and ESC function on and off
In some models, the electronic stability control (ESC) can also be switched off in addition to switching off the traction control system (TCS).
Depending on the vehicle's equipment level, additional text messages could appear in the display on the instrument cluster to provide further information or to ask you to perform certain tasks .
Overview of fitting locations – controls in dash panel
Note
The illustration shows fitting locations for LHD vehicles. Fitting
locations for RHD vehicles are similar.
1 -
Hazard warning light switch -EX3-
Removing and installing
→ Chapter
2 -
...
Removing and installing parking brake motor -V282-/-V283-
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Vehicle diagnostic tester
Removing
Note
...
Removing and installing window channel
Removing and installing window channel
Note
The removal and installation sequence is only for the
left window channel. Removal and installation of the right
window channel are similar.
...