VW Golf manuals

Volkswagen Golf Service & Repair Manual: Switching off auxiliary and supplementary heater

If the button instant heat button has been pressed, or after the preset operating time has expired or the coolant has reached a temperature of 88° C, the combustion is ended and the run-on mode begins. The circulation pump -V55- and the combustion air blower -V6-, however, continue to run to cool down the heater (run-on mode) and are switched off automatically.
  Note
The run-on period of the circulation pump -V55- and the combustion air blower -V6- depends on the operating mode in which the auxiliary and supplementary heater was switched off.
The run-on period is approx. 3 minutes.
Depending on the control unit software version, slight deviations in the specified run-on values are possible.
   
Auxiliary heater mode
Switching on auxiliary heater mode in vehicles with manual air conditioning: –  Press instant heating button-1-.   ...

Other control components
...

Other materials:

General notes
Gearbox The torque of the engine is transmitted via the flywheel to the dual clutch gearbox. The flywheel and the dual clutch are joined together by a toothed connection. Together they take on the function of the dual-mass flywheel ...

Removing and installing rear axle, multi-link suspension, four-wheel drive
Special tools and workshop equipment required Torque wrench -V.A.G 1332- Engine and gearbox jack -V.A.G 1383 A- Tensioning strap -T10038- Locating pins -T10486-   Removing subframe with ...

Overview of fitting locations – adaptive cruise control, variant 2
1 -  Dash panel insert -KX2- With control unit in dash panel insert -J285-. Removing and installing → Chapter 2 -  Front bumper carrier 3 -  Retaining plate ...

© 2016-2024 Copyright www.vwgolf.org