VW Golf manuals

Volkswagen Golf Service & Repair Manual: Structure of factory finish, base coat

Base coat, 2-door

Structure of factory finish, base coat

 -  Base coat
Only the coloured areas of the body receive a base coat.

 
     
Base coat, 4-door

Structure of factory finish, base coat

 -  Base coat
Only the coloured areas of the body receive a base coat.
Structure of factory finish, surfacer
Surfacer, 2-door vehicles  -  Surfacer Only the coloured areas of the body are filled.         ...

Structure of factory finish, clear coat
Clear coat, 2-door  -  Clear coat Only the coloured areas of the body receive a clear coat.         ...

Other materials:

Engine preheating
Fig. 131 The front left of the bumper: connection for engine preheating ② First read and observe the introductory information and safety warnings In engine preheating mode, the engine coolant is heated slowly using a heating element while the vehicle is stationary. To do so, the cables ...

Assembly overview - brake pedal, RHD vehicles
  Note The handbrake pedal travel must not be restricted by additional floor coverings. Do not lubricate or grease the pivot pin. The pivot pin must remain dry. 1 -  Bolt 20 Nm 2 -  ...

Assembly overview - rear door trim
  Note The assembly overview is shown for the rear door trim on driver side. The assembly overview for the front passenger side is analogous. 1 -  Door trim Removing and installing → Chapter 2 -  Rear d ...

© 2016-2024 Copyright www.vwgolf.org