Volkswagen Golf Service & Repair Manual: Starter
- Assembly overview - starter (vehicles with manual gearbox)
- Assembly overview - starter, vehicles with dual clutch gearbox (DQ200–7F)
- Assembly overview - starter, vehicles with dual clutch gearbox (DQ250-6F)
- Removing and installing starter, vehicle with manual gearbox
- Removing and installing starter, vehicles with double clutch gearbox (DQ200–7F)
- Removing and installing starter, vehicles with double clutch gearbox (DQ250-6F)
Removing and installing voltage regulator, manufacturer: Valeo
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Removin ...
Assembly overview - starter (vehicles with manual gearbox)
1 -
Starter -B-
Removing and installing
→ Chapter
2 -
Double stud
Specified torque: 80 Nm
...
Other materials:
Removing and installing bonnet release lever
Removing
–
Tighten release lever -1- and unlock
bonnet.
–
Insert a small screwdriver in gap between release lever
-1- and retaining clip
-2-.
–
Lever re ...
Charging battery in support mode with battery charger -VAS 5900-
General notes:
The support mode provides the onboard supply with power when
the battery is removed or disconnected.
For further information, refer to the
→ operating manual VAS 5900.
The ...
Nuts and bolts
Loosen and tighten bolts and securing nuts for covers and
housings diagonally.
Avoid canting particularly sensitive parts such as comtrol
motor with control unit. Loosen and tighten them diagonally in
stages.
...
