Removing and installing control unit for fuel tank leak detection -J909-
Removing
Fitting location
→ Item:
–
Release and pull off connector -arrow-
on control unit for fuel tank leak detection -J909--1-.
...
Balancing wheel, checking radial and lateral run-out of wheels and tyres
Before you start balancing the wheels, the following
requirements must be met.
Tyre pressure must be OK.
Tread must not be worn on one side. Tread depth should be at
least 4 mm.
T ...
Removing and installing turn signal switch -E2-, Valeo
Note
The turn signal switch -E2-, cruise control system switch
-E45- and intermittent wiper switch -E22- are combined to form
the steering column combination switch -E595-.
These switches cannot be separated.
...