The roll-back function for the electric panorama sliding/tilting roofChecking pistons and cylinder bores
Checking piston
–
Using a micrometre, measure approx. 10 mm from the lower
edge, perpendicular to the piston pin axis.
Maximum deviation from nominal dimension: 0.04 mm
...
Removing and installing wheel bearing unit, multi-link suspension,
four-wheel drive
Special tools and workshop equipment
required
Torque wrench -V.A.G 1332-
Torque wrench -V.A.G 1410-
Remov ...
Renewing LSF Lambda probe (4-pin)
Note
If necessary, replace attachment parts, cable ties or
marking rings to match the uniform probe to the defective probe
as specified.
Do not repair Lambda probe wires, since this can result in
malfunctions.
...