Volkswagen Golf Service & Repair Manual: Separating engine and gearbox

Volkswagen Golf Service & Repair Manual / 4- cylinder injection engine(1.4 1 direct inction. turbocharger) / Engine assy, cylinder blook, crankcase / Removing and installing engine / Separating engine and gearbox

Special tools and workshop equipment required

Shackle -10 - 222 A /12-

Separating engine and gearbox

Hooks -10 - 222 A /2-

Separating engine and gearbox

Workshop hoist -VAS 6100-

Procedure

Engine/gearbox assembly removed and attached to engine support T10497.

–	Remove starter → Electrical system; Rep. gr.27.

Separating engine and gearbox

–	Bolt shackle -10 - 222 A /12- to gearbox.

–	Engage work shop hoist -VAS 6100- with hook -10 - 222 A /2- on shackle -10 - 222 A /12-.

Separating engine and gearbox

–	Remove bolts -1, 2, 3, 6, 7, 8, 9- securing gearbox to engine.

–	Pull gearbox off engine.

Separating engine and gearbox

Removing engine

Special tools and workshop equipment required Removal lever -80 - 200- Extension -2024 A /1- of lifting tackle -2024 A- Engine and gearb ...

Securing engine on engine and gearbox support

Special tools and workshop equipment required Engine and gearbox support -VAS 6095- ...

Other materials:

Operating the cruise control system (CCS)
Fig. 161 On the left of the steering column: switch and buttons for operating the CCS Fig. 162 Left-hand side of the multifunction steering wheel: buttons for operating the CCS First read and observe the introductory information and safety warnings Function ...

Removing and installing guide plate
Special tools and workshop equipment required Removing Torque wrench -V.A.G 1783- Note The guide rails and the securing b ...

Removing and installing parking brake motor -V282-/-V283-
Special tools and workshop equipment required Torque wrench -V.A.G 1331- Vehicle diagnostic tester Removing Note ...