Volkswagen Golf Service & Repair Manual: Separating brake pedal from brake servo
Special tools and workshop equipment
required |
|
|
|
– |
Remove footwell cover on driver side
→ General body repairs, interior; Rep. gr.68. |
|
|
|
– |
First press brake pedal in direction of brake servo and
hold. |
– |
Insert release tool -T10159B- and pull it in direction of
driver seat. When doing this, counterhold on brake pedal (at
this stage, the pedal must not be allowed to move towards driver
seat). This action will press retaining lugs
-3- of mounting off ball head of
plunger rod -2-. |
For the sake of clarity, separation of brake pedal from
brake servo is shown with pedal cluster removed. |
– |
Pull release tool -T10159B- and brake pedal together towards
driver seat. (This action will pull the brake pedal off the ball
head of the plunger rod). |
Footwell cover on driver side
→ General body repairs, interior; Rep. gr.68. |
|
|
|
Removing
–
Remove wiper arms
→ Electrical system; Rep. gr.92.
–
Remove plenum cham ...
Hold ball head of plunger rod in front of mounting and push
brake pedal in direction of brake servo, so that the ball head
clicks into place.
...
Other materials:
Lights, lamps, switches outside
Operation and safety notes for gas
discharge bulbs
–
If repairs are to be made to the headlight with gas
discharge bulbs, observe the following:
Notes on dangerous high voltage/currents
→& ...
Removing and installing defroster flap control motor -V107- with
potentiometer -G135-, LHD vehicles
Special tools and workshop equipment
required
Vehicle diagnostic tester
First carry out the following work:
–
Switch off all electrical consumers.
–
...
Front view
Fig. 2 Overview of the front of the vehicle
Key for :
Sensor or camera window on the mirror
base for:
Rain sensor
Main beam assist (Light Assist)
Lane departure warning system (Lane Assist)
Road sign recognition
Windscreen
W ...
© 2016-2024 Copyright www.vwgolf.org