VW Golf manuals

Volkswagen Golf Service & Repair Manual: Securing engine on engine and gearbox support

Special tools and workshop equipment required
   
Engine and gearbox support -VAS 6095-
 

Securing engine on engine and gearbox support

Workshop hoist -VAS 6100-
Procedure
Gearbox detached from engine → Chapter.
 

Securing engine on engine and gearbox support

–  Attach lifting tackle -2024 A- on engine and workshop hoist -VAS 6100- as shown in illustration.
  Note
In order to match the lifting tackle to the centre of gravity of the engine, the holes in the hook rail must be allocated as shown in the illustration.
The support hooks and retaining pins on the lifting tackle must be secured with locking pins -arrows-.
–  Lift engine off T10497 using workshop hoist -VAS 6100-.
 

Securing engine on engine and gearbox support

–  Secure engine with pins -arrows- on engine and gearbox support -VAS 6095- as shown in illustration.
 

Securing engine on engine and gearbox support

Separating engine and gearbox
Special tools and workshop equipment required     Shackle -10 - 222 A /12-   ...

Installing engine
Procedure Engine/gearbox assembly secured to engine support T10497.   Note Renew bolts that are tightened w ...

Other materials:

Trade names and designations
Refrigerant R134a is currently available under the following trade designations: H-FKW 134a SUVA 134a KLEA 134a   Note Other trade designations ...

Charging, replacing, disconnecting and connecting the vehicle battery
First read and observe the introductory information and safety warnings Charging the battery The vehicle battery should be charged by a qualified workshop, as the technology used in factory-fitted batteries requires voltage-limited charging  . Volkswagen recommends using a Volkswagen deal ...

Lowering rear axle, multi-link suspension, four-wheel drive
Special tools and workshop equipment required     Torque wrench -V.A.G 1332-   Engine and gearbox jack -V.A.G 1383 A- ...

© 2016-2024 Copyright www.vwgolf.org