Volkswagen Golf Service & Repair Manual: Safety precautions when working on vehicles with Start/Stop system

Volkswagen Golf Service & Repair Manual / Running gear, axles, steering / Technical data / Notes on safety / Safety precautions when working on vehicles with Start/Stop system

WARNING

All bolts and nuts must be fully tightened according to specifications before the vehicle is driven on public roads.

WARNING

There is a risk of an accident through an automatic engine start on vehicles with Start/Stop system.

On vehicles with an active Start/Stop system the engine may start automatically.

Therefore it is essential to ensure that the Start/Stop system has been deactivated when working on the vehicle (switch off ignition, then switch on again as required).

Notes on safety

...

Safety precautions when working on subframe

It is not permitted to carry out welding and straightening operations on load-bearing or wheel-guiding suspension components. Always rene ...

Other materials:

Removing and installing headlight dipped beam bulb (LED)
Special tools and workshop equipment required Front-end hook -3370- Torque wrench -V.A.G 1783- ...

Warning lamp
First read and observe the introductory information and safety warnings Display Possible cause Solution Any or all vehicle doors are open or not closed properly. Do not drive on! Open the appropriate vehicle door and th ...

Paintwork structure of a factory finish
Structure of a solid-colour (uni) paint finish, conventional Coat thickness approx. 80-120 µm 1 - Sheet steel 2 - Zinc phosphate 3 - ...