Volkswagen Golf Service & Repair Manual: Safety precautions when working on cooling system
| Risk of scalding due to hot coolant |
| The cooling system is under pressure when the engine is hot. Hot steam/hot coolant can escape - risk of scalding. |
| – | Wear protective gloves. |
| – | Wear eye protection. |
| – | Release pressure by covering cap of coolant expansion tank with a cloth and opening it carefully. |
Safety precautions during road tests in which test and measuring equipment
is used
Risk of injury due to unsecured test and measuring equipment
If a front passenger airbag is triggered during an accident,
unsecured test and measuring equipment can become dang ...
Safety precautions when working on ignition system
Risk of injury due to electric shock
The ignition system is under high-voltage when the engine is
running. Touching the ignition system may result in an electric shock.
...
Other materials:
Removing and installing rear axle, multi-link suspension, four-wheel drive
Special tools and workshop equipment required
Torque wrench -V.A.G 1332-
Engine and gearbox jack -V.A.G 1383 A-
Tensioning strap -T10038-
Locating pins -T10486-
Removing subframe with ...
Removing and installing refrigerant shut-off valve for high-voltage battery
heat exchanger -N542
Removing
–
Observe safety precautions
→ Chapter „Safety precautions when handling refrigerants“.
–
Comply with notes
→ Chapter „Working on refrigerant circuit“.
...
Overview of fitting locations – controls in centre console
Note
The illustration shows fitting locations for LHD vehicles. Fitting
locations for RHD vehicles are similar.
1 -
Starter button -E378-
Removing and installing
→ Chapter
2 -
Switch mod ...
