Volkswagen Golf Service & Repair Manual: Safety precautions when working in the vicinity of high-voltage components
| Risk of death due to high voltage |
| The high voltage system carries high voltage. If high-voltage components or high-voltage lines become damaged, there is a risk of severe or fatal injury due to electric shock. |
| – | Carry out visual inspection of high-voltage components and cables. |
| – | Never use sharp tools or tools which create shavings or are used to shape material. |
| – | Never weld, braise or use hot glue or hot air. |
Safety precautions when working on vehicles with high-voltage system
Risk of death due to high voltage
The high voltage system carries high voltage. Electrical shocks will
cause serious injuries or death.
–
People having ...
Safety precautions when working on vehicles with Start/Stop system
Note the following when working on vehicles with Start/Stop
system:
WARNING
Risk of injury due to aut ...
Other materials:
Removing and installing rear left vehicle level sender -G76-, multi-link
suspension, four-wheel drive
Special tools and workshop equipment
required
Torque wrench -V.A.G 1410-
Removing
–
Disconnect co ...
Removing and installing front passenger side window regulator button -E716-
Note
The removal and installation procedures are described for
LHD vehicles. Removal and installation for RHD vehicles are
similar.
Removing
–
Remove front door trim panel
→ ...
Introduction
This chapter contains information on the following subjects:
→ Attaching the mounts and roof carrier
→ Loading the roof carrier
The roof of the vehicle has been designed for optimum aerodynamic effect. It
is therefore no longer possible to attach conventional roof carrie ...
