Danger to life due to high voltage |
The high-voltage system is under high voltage. If high-voltage components are damaged, there is a risk of severe or fatal injury due to electric shock. |
– | Perform visual check of high-voltage components and high-voltage cables. |
– | Never use cutting or forming tools, or any other sharp-edged tools. |
– | Never use heat sources such as welding, brazing, soldering, hot air or thermal bonding equipment. |
Removing and installing ignition coils with output stage
Special tools and workshop equipment
required
Puller -T10530-
Note
The ignition coils are easier to remove when the engine is
warm. The grease used durin ...
Removing and installing fuel gauge sender -G-, vehicles with front-wheel
drive
Removing
–
Remove fuel delivery unit
→ Chapter.
–
Note colour assignment of cables -1-
for re-installation.
– ...
Using a child seat on the rear seats
First read and observe the introductory information
and safety warnings When fitting a child seat to a rear seat, the position
of the front seat must be adjusted to ensure that the child has sufficient space.
Adjust the front seat according to the size of the child seat and child. Ensure
t ...